The [H]ardForum Perpetual Freebies Thread

pendragon1 said:
$10 for non-prime, i think.
ok. just an option in case someone here doesnt have one kickin around.
Click to expand...
Prince Valiant said:
I don't shop there and thus never think about checking it. Is that price with Prime?

Edit: Thanks for the heads up but I'd rather get one elsewhere if I can.
Click to expand...
If you don't mind me asking, what's the use case? If it's to add ports for software raid arrays I'd steer clear and just get 8 port SAS controllers on eBay for about $25. These SATA controllers aren't built for concurrent read/writes and I had many bad experiences trying to run arrays off of them
 
ChineseStunna said:
If you don't mind me asking, what's the use case? If it's to add ports for software raid arrays I'd steer clear and just get 8 port SAS controllers on eBay for about $25. These SATA controllers aren't built for concurrent read/writes and I had many bad experiences trying to run arrays off of them
Click to expand...
Planning a platform upgrade to AM5 sometime within the next few months and the boards I can justify don't have enough for my liking. It'd be for HDDs for storage (individual drives), disc drives, eSATA or some combination. Worst case is probably ripping a BD/some write(s) to one drive and reading some files on it.
 
Last edited:
dar124 said:
I am looking to get rid of this 3 pack of Pixel 7 phone glass for the cost of shipping. I'm thinking $5 shipped. It is new / sealed in plastic. I got these with my Pixel and decided to get the privacy glass that dims if you look at it sideways, so these were never opened.


JETech Tempered Glass Screen Protector for Google Pixel 7

View attachment 616906
Click to expand...

This is no longer available. There wasnt any interest, so I'm donating it to our local thrift store.
 
Anyone have leftover TPU 3D printing Filament (1.75mm) Shore 50A to 80A? I've been shopping for a half KG spool of Shore 50A to Shore 70A and can't seem to find one. Only full Kilogram spools of 95A hardness TPU that cost more than it's worth. I only want to print a few small round membrane buttons for a "waterproof power button". Wondering if anyone has like 100 grams of soft 50A to 70A TPU filament to spare.

Also looking for full size 1.75mm nozzles to recycle plastic soda bottles into filament.

I have some 3D printer parts / consumable parts: Blue Capricorn tubing (honestly you only need a 1 inch piece of blue tube inside of your hotend while you run white PTFE from hotend to spool) / a bunch of brass 0.4mm nozzles (MK8) / hardened steel nozzles (0.2, 0.4, 0.6, 0.8mm just ask me which size you need), Titanium all metal Heat Break, Ender 3 V2 hotend with Copper Titanium Heat Break and Capricorn tube insert (w/ plastic cover, fans, heat cartridge + thermistor). I can ship small amounts of Slice Engineering thermal paste in small plastic jars.

Also have Swiftech MCP35X reservoirs.
 
Anyone have any Pixel 6 pro screen glass? I am clumsy and have burned through 5 or six already and the one I have now is cracked.
 
Picked up a couple older desktops and am looking for the following if anyone has anything laying around:
  • 1x PCI-E graphics card, full height
  • 1x PCI-E graphics card, half height
  • 2x DDR3 DIMM
  • 2x DDR2 DIMM
  • 2x SATA SSD

Also have the following for cost of shipping from 28025:
  • 4GB Crucial DDR3 1333 SODIMM
  • 4GB Kingston DDR3 1600 SODIMM
  • 4GB Samsung DDR4 2400 DIMM
  • Pentium G4560 CPU
 
Last edited:

Attachments

  • PXL_20240109_232819132.jpg
    PXL_20240109_232819132.jpg
    734.3 KB · Views: 0
Last edited:
Anyone have an older MATX Supermicro server motherboard that supports an Intel Xeon E3 socket 1155 CPU / DDR 3 ECC Unregistered RAM / Intel C204 chipset? I gave my Supermicro X9SCM-IIF to someone and while it worked when I last used it, it's been giving him hell. I know the onboard VGA died on it 3 years ago so I had to use a PCI-e 1x GPU to get video output (I understand IPMI is a feature on the board, but it's pretty vulnerable so I disabled that). I believe people were literally throwing these away in Blade form factor last year, but it was just a matter of shipping / moving them. I could use a spare MATX Supermicro board and any DDR3 ECC memory that it may come with. Thanks!
 
Time for me to give something back for once.

bxsiTDe.jpg

View: https://i.imgur.com/bxsiTDe.jpg

Anyone want this Black Magic Design DeckLink Mini Monitor card? I bought it at a local amazon return dumpster store a while back, thinking it was a capture card. It's untested (I don't have space to test it in my PC) but it looks to be in good physical shape. It only has a low profile bracket though. Just cover the postage or send me a shipping label and we're good. I'll send it in an envelope, it should arrive fine.

Edit: And it's gone!
 
Last edited:
Got a bunch of freebies up, check my thread for pics.
1) Perfect pushup handles
2) Tacklife multi function wire tracker
3) Galax Slider-01 Gaming mouse (NIB) https://www.galax.com/en/gaming-accessories/slider-series/slider-gaming-mouse-01.html
4) Kingston DDR4 2x4gb https://www.kingston.com/en/memory/search/discontinuedmodels?partid=HX430C15SB2K2/8
5) Cablemod kit for EVGA PSU https://cablemod.com/product/cablemod-classic-modmesh-e-series-g3-g2-p2-t2-cable-kit-white-blue/
6) Das Keyboard (very clean) --Cherry MX browns
 
Last edited:
Furious_Styles said:
Got a bunch of freebies up, check my thread for pics.
1) Perfect pushup handles
2) Tacklife multi function wire tracker
3) Galax Slider-01 Gaming mouse (NIB) https://www.galax.com/en/gaming-accessories/slider-series/slider-gaming-mouse-01.html
4) Kingston DDR4 2x4gb https://www.kingston.com/en/memory/search/discontinuedmodels?partid=HX430C15SB2K2/8
5) Cablemod kit for EVGA PSU https://cablemod.com/product/cablemod-classic-modmesh-e-series-g3-g2-p2-t2-cable-kit-white-blue/
6) Das Keyboard (very clean)
Click to expand...
PM for #5 & 6
 
I have a couple one Ryzen 1600's that nobody appears to want to pay money for. They both ran fine until replaced (with 3500X's). Both were mildly overclocked to 3.6GHz all-core for a few months until I decided it wasn't worth it; never over-volted. No bent pins. No box or cooler, they'll ship in AMD's little plastic thingie.

Also: RAM, one 2x8GB DDR4 kit of two sticks of G.Skill Ripjaws F4-3000C15D-16GVKB 3000 15-26-26-35. Functional when last used.

I suppose I should sell these but I just can't be arsed, and they are collecting dust.
 
Last edited:
pitingres said:
I have a couple Ryzen 1600's that nobody appears to want to pay money for. They both ran fine until replaced (with 3500X's). Both were mildly overclocked to 3.6GHz all-core for a few months until I decided it wasn't worth it; never over-volted. No bent pins. No box or cooler, they'll ship in AMD's little plastic thingie.

Also: RAM, two 2x8GB DDR4 kits. Two sticks of G.Skill Ripjaws F4-3000C15D-16GVKB 3000 15-26-26-35, two of Team T-force Vulcan-Z TLZGD416G3200HC16FBK 3200 16-20-20-40. Functional when last used.

I suppose I should sell these but I just can't be arsed, and they are collecting dust.
Click to expand...
PM sending on ram
 
I have a Dell Inspiron 15 5567 laptop. Basically it won't turn on. Hit power, nothing happens, no lights, no sounds. I don't know what's wrong and have no interest in messing with it. I pulled the sata ssd, ram, and wifi card but if anyone wants the rest they are welcome to it. It has an i7-7500u cpu in it. Shipping from 28025.
 
Last edited:
buschman31 said:
Like to know if anyone has a S pen for a Galaxy Note II phone. I found one at the thrift store, no battery so i bought one and it turns on. Had to do hard reset to clear the pin.
Click to expand...
Just want to mention that any s pen should work with the phone but it just won't fit into the silo except the one that is designed for the phone.
 
SAMSAMHA said:
Just want to mention that any s pen should work with the phone but it just won't fit into the silo except the one that is designed for the phone.
Click to expand...
thanks and i do have a S pen that came w/ my wife's S6 lite that she's using. Only problem i have w/ the phone is when I turn it off, it wont turn back on unless I plug it into a charging cable and then turn it on again then remove the cable. I bought a new battery for it. It stays on with no problem
 
buschman31 said:
thanks and i do have a S pen that came w/ my wife's S6 lite that she's using. Only problem i have w/ the phone is when I turn it off, it wont turn back on unless I plug it into a charging cable and then turn it on again then remove the cable. I bought a new battery for it. It stays on with no problem
Click to expand...
Sounds like a problem with the power switch or the power circuit. I bet a cell phone place could fix that.
 
SamirD said:
Sounds like a problem with the power switch or the power circuit. I bet a cell phone place could fix that.
Click to expand...
ok think i was not holding down the power button long enough for it to power up. it comes on fine now after a long press of the power button
 
buschman31 said:
thanks and i do have a S pen that came w/ my wife's S6 lite that she's using. Only problem i have w/ the phone is when I turn it off, it wont turn back on unless I plug it into a charging cable and then turn it on again then remove the cable. I bought a new battery for it. It stays on with no problem
Click to expand...
SamirD said:
Yep, that's normal operation for power switches these days. Gone are the days when they worked like real switches.
Click to expand...
I have a laptop that behaves similarly, I'll have to try and see if a long press works for that. Thanks.
 
I picked up a handful of iPads and iPhones from a customer whos business burned down way back, they were his and his fathers, I finally finished going through them the other day, 2 iPads are still locked to there iCloud/Apple accounts but he (father has since passed) doesnt have any unlock or account info on them. (can provide a screenshot of my convo about unlock codes with him if wanted)
I did an iTunes restore and its a fresh install now, but still locked.
Anyone have use for them for parts? just cover shipping
Model A1566
Model A1670
-------both ipads gone
 
Last edited:
dbwillis said:
I picked up a handful of iPads and iPhones from a customer whos business burned down way back, they were his and his fathers, I finally finished going through them the other day, 2 iPads are still locked to there iCloud/Apple accounts but he (father has since passed) doesnt have any unlock or account info on them. (can provide a screenshot of my convo about unlock codes with him if wanted)
I did an iTunes restore and its a fresh install now, but still locked.
Anyone have use for them for parts? just cover shipping
Model A1566
Model A1670
Click to expand...
have him take both to the apple store and maybe they can help him on that
 
I thought of that, but the only reason I got them was because they were sitting on his dining room table for a year after closing the business, he was going to chuck them.
 
Prince Valiant said:
I have a laptop that behaves similarly, I'll have to try and see if a long press works for that. Thanks.
Click to expand...
Yeah laptops work in a similar way except their power switches can stop working sooner than phones due to use, etc. Personally, I miss real switches. I hate losing 1/2 a second holding it in each time.
 
I've got the following:

Zagg Pro (I think) that was used maybe three times
A Surface Pro pen that was purchased in 2016-2017
Seagate 1RK172-566 1TB 2.5" 7mm platter HDD

I'll be able to ship them off starting January 28th
 
Last edited:
You must log in or register to reply here.
Back
Top