I don't really know how to state the title so sorry if it's not what you were expecting or if this is the wrong sub forum.
I just got my computer back after a moving company had it for the better part of 7 months. When I opened it up to make sure nothing had come loose, especially hoses since it's water cooled, I found hard drives in various states of inappropriate positions... Most were screwed in, but about 4 of them had come loose and were banging around in my computer... I checked them for obvious damage then put them in their correct positions and after adding distilled water, my computer booted right into windows.
Here is the odd part. I cannot transfer anything larger than a few gigs between the drives. Including my external hard drives. For instance, I have repeatedly tried to move a 9.8GB folder containing the first season of game of thrones. Across the USB3 port (it's a usb 3 external) I get about 32MB/s transfer, but it drops by about .5MB/s every second or 2 until it gets down to a few KB and stalls out. Will just hang there for hours...
I get the same thing going from Internal HDD to Internal HDD via Sata II ports... I have tried various combinations across all 12 Internal HDD's and 3 USB3 externals all with the same result. All the externals are running around 80-90MB/s on my laptop via USB3.
Hard drive health reports all drives good and other than this problem the system seems stable. No BSD etc and I can run Diablo 3, SC FA, and Sins without problems.
Anyone have any idea's?
Edit: forgot to mention, rig is my sig rig...
I just got my computer back after a moving company had it for the better part of 7 months. When I opened it up to make sure nothing had come loose, especially hoses since it's water cooled, I found hard drives in various states of inappropriate positions... Most were screwed in, but about 4 of them had come loose and were banging around in my computer... I checked them for obvious damage then put them in their correct positions and after adding distilled water, my computer booted right into windows.
Here is the odd part. I cannot transfer anything larger than a few gigs between the drives. Including my external hard drives. For instance, I have repeatedly tried to move a 9.8GB folder containing the first season of game of thrones. Across the USB3 port (it's a usb 3 external) I get about 32MB/s transfer, but it drops by about .5MB/s every second or 2 until it gets down to a few KB and stalls out. Will just hang there for hours...
I get the same thing going from Internal HDD to Internal HDD via Sata II ports... I have tried various combinations across all 12 Internal HDD's and 3 USB3 externals all with the same result. All the externals are running around 80-90MB/s on my laptop via USB3.
Hard drive health reports all drives good and other than this problem the system seems stable. No BSD etc and I can run Diablo 3, SC FA, and Sins without problems.
Anyone have any idea's?
Edit: forgot to mention, rig is my sig rig...
Last edited: