ctOS Tower 27 (modded Tt View 27) by SimpleModz

[alexciobanu]

Hey guys,

Yet another case mod from my, I'm working on 3 at the moment.

This one is in the Thermaltake View 27 case. Iit will be Watch Dogs 2 themed and I'm calling it ctOS Tower 27.

I did an overview of the case a few months back. You can check it out below:



SPECS

Case - Thermaltake View 27
CPU - Intel Core i7 6700K
MB - ASUS Sabertooth Z170-S
RAM - 4 x 4GB Kingston HyperX Predator 3000MHz DDR4
GPU - NVIDIA GTX 1070 Founders Edition
SSD - 2 x 240GB Kingston HyperX Savage
HDD - Seagate TBC
PSU - Thermaltake Thermaltake DPS G RGB 650W

Custom cables & lighting - CableMod

Water Cooling - Thermaltake

I'll start this one as well with some photos of the case:

Thanks for checking it out and stay tuned for more!

Cheers,

Alex

 

[alexciobanu]

Hey guys,

Here's the first update

I made a cut out in the PSU shroud and added some acrylic cover panels. Next step is to add all the graphics.

The cut out will serve to illuminate through the bottom acrylic panel once the graphics are applied.

Thanks for checking it out and stay tuned for more!

Cheers,

Alex

 

[alexciobanu]

Hey guys,

I have some pretty cool hard tube fittings to show you

The Thermaltake Pacific RGB fittings!

I did a video on these a while back and only getting around to using them now.

Thanks for checking it out and stay tuned for more

Cheers,

Alex

 

[alexciobanu]

Thermaltake Riing Plus RGB fans and Tt premium riser cable!

Stay tuned for more!

Cheers,

Alex

 

[alexciobanu]

Hey guys,

I have an update on the work I've done on the fans and SSDs. This will give you more of an idea for the theme and the vinyl that I'm using

Thanks for checking it out and stay tuned for more!

Cheers,

Alex

 

[alexciobanu]

As the fans and SSDs, I added a similar skin to the ASUS Sabertooth Z170S motherboard

BEFORE

AFTER

And same with the pump/res combo

Stay tuned for more guys

Cheers,

Alex