Recent content by nicka

relisted: http://www.ebay.com/itm/-/301027709390

Just need to add a CPU, (Xeon, i3.) http://r.ebay.com/s0z3iu

Besides the cool wow factor of running SSD's in RAID0, there is really no real world, daily value you'll see compared to a newer drive of large capacity. While day to day use, games, media viewing will benefit with the faster access speed for loading, the real use I could see anyone using a...

I've been running 6x of these same drives, 2TB models, with different firmwares with no issues. Unless you find something specific about a certain firmware having uses, I won't worry about it. Heres mine: scsi-SATA_ST2000DM001-1CH scsi-SATA_ST2000DM001-1CH scsi-SATA_ST2000DM001-1CH...

Anyone able to get AFP sharing to work with Illumian yet?

4x500GB 7200rpm, and 2x1.5TB 5900 rpm. Go two pools or one with a vdev for each set of drives?

Grub will boot into say, OI "6" on the first reboot after napp-it install without any user input; which is why I think we are seeing these errors. Selecting the first menu option in grub brings a post napp-it install boot into view, but AFP installs are disappearing after install and reboot.

Had the same problem since using the newest napp-it stable. Once I installed and reboot, needed to go back in grub and select the first install listed and it worked. After installing APF and rebooting in any of the selections, I still get nettalk not installed in services. Only had this...

So I will benefit with more disk, and more ram in the zfs unit, you think? SSD?

CDM is showing 100MB/s over two gigabit links.

4/8/16k: Running one a separate disk now (If I can figure it out without a filesystem.)

After much google and you tube videos, I have come to ask the advice of the pros. I had better performance expectations for my current setup in the area of through put over iSCSI between my ESXi 5 host and shared storage SAN/NAS. I have attached as many screen shots and listed the settings and...

RMA'd the board, Asus was convinced 2 DIMM slots are toasted. Went with a MBD-X9SCL+-F..

Whats the model number on that ram? Which bios version?

I just got this board from the open box deal on newegg yestersday. I can't get it to boot with all 4 dimms in though, only 2x4 in the first two slots closest to the cpu socket. I get an error 45 on the little LED error code TPM gadget. Heres the ram I'm using...