Search results

Can someone provide the link of M1AF's test results in cooling this case? TIA! Found it: https://docs.google.com/spreadsheets/d/1TqAKkLlGkm_nWHqYv7MEcm2IRLucP1oPXJWKt8cHpkw/edit#gid=1512767329

About this setup Nanook, How will you setup your fans if using a Tempered Glass?

I didn't try using my GPU with its fans since I know it'll run hot on this case and my ambient temp is around 30 C. So when I build my rig I took its cooler and install accelero. With the F12's it's keeping around 68C during load and on idle its silent. I guess the downside is I cannot OC it...

I've been using NFxF12's on my 1080ti with accelero as exhaust so far its keeping my GPU cool less than 70deg. I'm thinking of switching to the new A12x25's to see if it would make the temps better

Thanks. I was trying to put the included 140mm fans but it won't fit so I was thinking if a normal 120 25mm would fit also if I can put a 25mm 92 fans at the back

were you able to put the 140mm fan underneath the heatsink? And those 92mm at the back slim?

I've brought the same dimension as the others brought and the m3 screws too, perfect fit

New case feets had arrived and installled! Here's the comparison between the default case feet vs what I've bought Here it is installed (sideview) Front view

Thank you all for your inputs. Will hold off on getting the windowed side panel then until they perforate it if its possible

I want to get the windowed side panel but I currently have 2x120's fans on the side. If I mount the included 140m fan on the C14 alone and remove the other 120 fan will it bring my temps up?

Anyone ordered case feets from GoodComponent lately? The status says its received but the tracking number they provided can't be tracked at https://www.17track.net/en. I tried to send a message to their support via WhatsApp but all they reply is "Hello" . I have ordered the feets on the 2Feb.

Can you share where did you get this from? Edit: nvm I found it. Did you use a mounting tape or an M3 screw?

Is it better than C14 and ACX 3 combo?

Yes, I've realised this so I lowered down my fan curve and it's now quieter.

Update: So I re-did my thermal paste but it was still the same. Then I noticed that the other F12 infront is spinning slowly. So what I did is I connected both fans using a splitter from my F12 to the GPU side. I ran Valley benchmark, The highest temp I've got is 65c which is good but the fans...

You can follow this guide posted by qrash.

I was thinking of connecting the bottom fans directly to the M/B but I'm not sure if that'll be ok.

They're pushing air out of the case. The temps never go down 50c even on idle. Is this normal? When you purchased your ML120's did you still connect them to your GPU or to the M/B? Do you have a picture of this setup?

Anyone installed Arctic AX3 on their 1080ti SC2? I'm not sure if I did something wrong here. I ran Heaven and max temp I've got is 84c on a 2k monitor with my fans on aggressive mode without overclock. Ambient temp is about 29c. I can't even overclock the card, Maybe because of the Thermal paste...

Thanks, What is the length of the SATA 3 cable for the ssd infront?

Can you share your CableMod configurator page?

nice and clean build.

It looks a lot better than the stock cables from Corsair, I remember you posting the site where you got them before. was it alibaba something?

The NZXT looks a lot nicer but this is something to consider. btw, Do you have the cable lengths for sleeved cables?

I was looking for the same cable you've used to mount both SSD's power infront but still no luck finding one where I'm at. I can't used Corsair cables as I can't close the front case.

I was able to get one back in my home country. I have not tested the temps yet as I'm haven't transferred my files from my old computer yet. For delid, I bought the Rockit when it went on sale. Probably after I run stress test when everything is all setup.

After almost a couple of months of ordering parts from various sites and waiting for shipment. I have finish my first SFF build. Specs: 8700k EVGA 1080 TI SC2 with Arctic Accelero Extreme III ASRock Z370 GAMING-ITX/AC Corsair SF600 NH-C14 for HSU Corsair Vengeance LPX 16GB (2x8GB) Samsung 960...

Most people here used a GPU with Arctic Accelero Extreme III and put 2x120mm fans as exhausts

Thanks! I've ordered mine too.

Have you put any filters in your case?

Where did you ordered your case feets?

I don't think that there will be a sale :(

it looks really nice! Can you share the cable lengths and where you bought the cables from?

It has more 6 USB 3.0 ports and Strix has 4 only. Yeah that's one downside. I am waiting for black friday sale as well to buy all my components.

Why haven't you consider ASRock's z370 Gaming ITX/AC?

Nice build! Do you have a build log?

Thank you for this info. Does P12's RPM able to cool down both GPU and CPU OC'ed?

I remember seeing your recommendation before that's why I was looking to get P12's earlier but they said that it's not using the newer SSO2 bearing. I would like to go full Noctua on my fans.

I'm a bit OC so I would want to see an equal size of fans on the side that's why I will go with two 120's just have to decide if F12 or P12. Thanks for the suggestion

Thanks for the advice. I'll most likely be going for F12 Chromax for GPU. Can I use F12's as intake for CPU as well? btw, I was able to find a C14 and it's on its way.