Mine has a red line from top to bottom, everything else with panel is perfect. Trying to fix it myself.
Like your keyboard, check out this prodigy on a Bluthner grand. https://youtu.be/VtvSGVQKWQg?si=MyThwMD6ZfMHU6Eb
1. With the AIO market rapidly improving , a need for a custom loop is fading fast. All components have MTBF from Aestech to D5 pumps.
I used to run a nano characterization center and our XRD/XRF instruments had Haskris R100C chiller systems and the pumps were composed of solid brass impellers...
IR diode in my Logitech G900 no issues. BTW a laser diode is just a modified LED with monochromatic/coherent output.
LED light comes from spontaneous emission, whereas laser diode light arises from stimulated emission.
Plastic sheets can be cut with scissors or exacto knife. Wife has paper cutter with a sliding blade for easy cuts. Use superglue or plastic cement to make cover using 90 degree joints. No PC or 3 d printer needed.
To clarify it was the PSU to GPU PCI cables that were bad, the rest of the Cablemods were fine. I tried every HW swap and SW updates/uninstalls with no remedy. I used the cables that came with the PSU and has been trouble free for over a year.
Exactly what the Red ecosystem is for PC editing and video production and with Nikon acquiring Red they should open up rental market lowering cost. Cannon has the rental market for DSLR lenses.
Nice discussions here but until content is readily available, it is a no sell for me. As screens get larger the PPI drops and can look low res depending on size.
Quality pixels over quantity factor, for example a 100K Christie 4K cinema projector is amazing just go to your local theater, no...
1. Any run of cable acts like an antenna, why pros use common noise reduction or XLR jacks. RCA plugs can be a noise machine especially with cheap cables.
2. You get what you pay for, my 200 USD Logitech PC 2.1 setup has a hum issue, my 1000 USD SVS sub does not.
3. Ground loops can be...
They tend to be revealing and with a flat freq. response they tend to be rock music unfriendly. See my post on high end audio. The Nautilus line is amazing but out of the budget.
B&W bookshelf spkrs will not drive this at ref levels though, this sonic destruction of a Bluthner grand is why...
Yeah i agree I am a retired Chemist and we used Monel all the time not cheap. Actually the most expensive stuff was virgin Teflon used in a custom reactor.
Look up the part number on digikey site to see if there is an OEM replacement and please be careful.
140 mm Double Ball-Bearing Fan (HA1425M12B-Z) per TPU reviewer
https://www.digikey.com
i understand so here it is in text.
Hope this helps I am a retired professional chemist with a specialty in analytical instrumentation and have a relative in the recording industry. I have knowledge of the consumer and pro side of audio. I have been noticing a lot of posts about speaker and...
If the PSU swap did not work I would swap the Cablemod set for the stock PSU cables, I had intermittent error 41 code reboots that were due to my Cablemod connector pins not making good contact within the connectors. If I touched the wiring harness it would reboot...
Why I am not concerned with Pb contamination. I characterized a brass Swagelok compression fitting that was factory cleaned by ultrasound and solvent wash.
Traces of leaded cutting lubricant is still present on fitting. The ratio of leaded area to bulk brass is very small. It is impossible...
1. i am more concerned with false advertising than Pb poisoning.
2. Dissimilar metals are a no no.
3. Be careful with antifreeze in your loop, I was a head Research Chemist for a govt fuel cell contract and they plumbed a lab scale industrial cooling system with the wrong PVC materials...
Should be fine for the price point. Will not drive this at ref levels though, this explosion of sound is why Krell sells 50k monoblocks, LOL. https://www.youtube.com/watch?v=OiJvmQW7kpk&list=RDOiJvmQW7kpk&start_radio=1
1. Diff tech different pros and cons, plus I would not compare unless both sets are pro calibrated in your living space.
2. This is what the married man calls the WAF or wife acceptance factor. Had same issue when I brought home the SVS subwoofer(18 Hz @110 dB) and other items ( 77 inch OLED...
FYI wiki derived note: The OLED material used to produce blue light degrades much more rapidly than the materials used to produce other colors; in other words, blue light output will decrease relative to the other colors of light. This variation in the differential color output will change the...