hi Razor, check when u got time. https://hardforum.com/threads/sapphire-nitro-rx580-se-crashes-under-load-etc.2032931/#post-1045821378 . I did the Tserver test, i guess you havent got time to check fro your rx580 values etc. Answer in hte thread. Thanks.
BGA failure includes GPU also the memory chips correct?I can start the card with a small cooler and check for faulty cap as you say. NO BGA rework need to visit shops etc,
Hi,
got the card that initially had no signal at all.LIghts and fans were working. After installing it 2-3 times with no picture i let it sit. The next day i isntalled it and got normal signal etc, installed drivers all good.
Now getting in Adrenalin go to tune checking things and try for...
I heated the pcb with a heatgun even as i could and used the smallest nostril on the rework station for removing the vram mosfet. I will try to remove the other vram mosfet and check .
Whats your take on removing the coils as others suggest and do a check ?
With lowside mosfets you mean the 3 remaining mosfets in the area where i removed the one who was initially off? Some other people suggest to remove the Vram coils and check the resistance
OK I managed the current injection. I measured 1.1v on the coils and also on the small caps on the backside of the memory chips. The card got little bit warm, memory chips gpu core in general felt warm. I used a cell phone flir camera which didn't show any significant thermal delta on a specific...
You still think despite the power supply showing 1A (its like there was no current going in the Card, dotn know why) that an evaporation test will show a faulty component. Shouldn't the powersupply show 10A if the card was capable of demand/draw? Card was ice cold not the slightest change in...
I have a power meter in the wall socket, when, I make the connection the consumption goes up 20w, so it seems she is getting fed, but I fail to see if so any change in Temps.