Mine has a red line from top to bottom, everything else with panel is perfect. Trying to fix it myself.
Like your keyboard, check out this prodigy on a Bluthner grand. https://youtu.be/VtvSGVQKWQg?si=MyThwMD6ZfMHU6Eb
1. With the AIO market rapidly improving , a need for a custom loop is fading fast. All components have MTBF from Aestech to D5 pumps.
I used to run a nano characterization center and our XRD/XRF instruments had Haskris R100C chiller systems...
IR diode in my Logitech G900 no issues. BTW a laser diode is just a modified LED with monochromatic/coherent output.
LED light comes from spontaneous emission, whereas laser diode light arises from stimulated emission.
corrugated plastic signboard could work too. Get it in black or white and paint or not.
Sheet metal and snips and a vice to bend and shape, could then drill and mount it.
Put an RGB led strip in there and make it a feature instead.
Plastic sheets can be cut with scissors or exacto knife. Wife has paper cutter with a sliding blade for easy cuts. Use superglue or plastic cement to make cover using 90 degree joints. No PC or 3 d printer needed.
To clarify it was the PSU to GPU PCI cables that were bad, the rest of the Cablemods were fine. I tried every HW swap and SW updates/uninstalls with no remedy. I used the cables that came with the PSU and has been trouble free for over a year.