Strange bird's latest activity

I managed to run the rdr2 ingame benchmark, but only with older nvidia drivers 555.85, I don't know what's going on, but it seems that the latest nvidia drivers are not good, at least for me.And the weirder thing is that they worked fine for a...

Now when the 3d ingame benchmark from rdr2 starts, the speaker starts popping and the screen just goes black. That hasn't happened to me yet, I hope it's just a memory error, that she sit down wrong. If it's not the memory, then it's the graphics...

Normally i raised, on 1.4v is ram, I don't know if i can raise more.

Here are pictures of the power supply corsair tx650w with dust and after a little cleaning. It seems that everything is ok with the power supply, there wasn't even too much dust.

Nothing from 3600MHz and IF 1800MHz, I had three short beep codes and I had bsod PAGE FAULT IN NONPAGED AREA. I tried 3600MHz with latencies 26-26-26-26-58 but nothing, now it's at 3333MHz because it's the closest to IF of 1664MHz. It's not top...

Well, nothing, just to share,it seems interesting. I didn't write anywhere that my power supply is great. I only ran the rdr2 ingame benchmark on it and it passed, everything seems fine. And this character obviously has something strange...

I don't even know what he filmed for over 3 hours, I'm just saying that he seems smart. He also wrote something on the board, he devoted a lot of time to that power supply, obviously not everything is according to the specifications.

There is a Brazilian on youtube who reviewed the msi mag650bn, over 3 hours of footage was recorded, he seems very smart, he even wrote something on the board... He also has some equipment on which he tested the power supply, the same as mine...

I installed the power supply, the first impression is that it is much lighter than the corsair tx 650w. I know that if the power supply is as heavy as possible, the quality is better. The heavier the better. But ok, it doesn't matter. On the...

I have a fetish for blower graphics, if I hadn't bought this one, I would have even changed it if I could get hold of those graphics, it's great.

PNY has a limited run of a 2-slot blower coming out toward the end of the year. Only 7,000 units will be produced. Kind of sad that what used to be the standard 2-slot form factor is now considered "SFF compatible."...

And what are you going to do with him now? Are you going to throw it away? I plan to maybe clean it if there is dust inside and maybe change the fan, the only thing I noticed was that the fan rotates more slowly sometimes, like some fans in the...

Defuse. New power supply coming to me today. I think I will dig up the old corsair and blow it out, would it be possible to change the fan, do you have any advice? p05ta1 the main thing is that you are happy, I just wanted to say that your power...

Defuse. This forum is quite virtuous. "The Enermax MAXPRO II series is one of Enermax’s long runner power supplies. Developed specifically for the European market, MAXPRO II is characterized by low noise and efficient operation. With 87% peak...

Good for you, have you maybe measured how much power your PC without a monitor draws from the wall, I would say no more than 400w. As for enermax, I think they only make power supplies for the EU market.

Defuse,don't get too hot, my new power supply is on its way, so I'll try 3600mhz with relaxed latencies and FCLK at 1800mhz. I will test that when I get a new power supply and when I have time, probably Sunday. I had no idea that the best memory...

first picture

Yes, I didn't say that anywhere, except that 1000w is overkill for rtx 4070 unless there is (are not) power supplies from the tier a segment of 600w and 650w. My first choice was enermax max 2 pro of 600w or 700w, but unfortunately they are not...

I think none of all, I already used Typhoon Burner, I have 2x8GB Hynix and 2x8GB Micron Memory, it's not certain B-Die ... at 3600mhz with Cl 16 is demolished, maybe work with Cl 18 from Pendragon. But 3400MHz is OK to me, and the processor now...

Well, let him buy what he wants, I'm just saying that if he won't have an rtx 4090 or 5090, then it doesn't really make sense. Not that I hold anything against him.I didn't read everything, I guess his PC works 24/7 all the time, so he wants...