Search results

Time to install some hardware .....I forgot to mention this wont be a WC case ! The first "whoops" Came when i tried to install the SSD's! Some Screw on covers where made up The Choice of Cooler is the Assassin III but i'll be running it it triple fan mod with a 4th matching...

I remember this! one of my earliest case mods :D This was a very sort after case back then and cost a fortune. It's def an Antec CT !

Appols for getting slack! i should update more often..... A hell of a lot more wet sanding flat buff and shine work to all the panels. But the next step was to add some Grills to the top vents. These were never for air but for looks. Each vent had a template made and old car speaker...

Cheers Nobu tyvm mate 👍 I get a bit attached to the clean look of the frosted plex too! Cheers mashie tyvm great to hear from you again mate 👍 As pendragon1 said below, it is indeed spray can over primer using a 2k clear coat. I use a typical auto shop bought Acrylic can pain, i use a...

After laying down some colour and some clear then letting it dry over night. The psu cover gets a quick light sand. This is to get the clear as flat as poss for a quick buff. Normally i'd let this sit for a week to let the clear go rock hard. But i wanted to see what sort of mirror finish i...

We're on the home stretch now ! ..... well until i change my mind again Yesterday was all the boring stuff..... more sanding and spot putty work... but today was a bit more fun as i finally get to throw down some colour First the boring! Kinda like running around putting out all the little...

Couple of small updates and new additions I knocked this up in the add break, a lil cover for the PSU and a place to hide some cable. Then it was time for some mesh modding A bit of primer and spray putty put em together for a look see and test fit Another Update is the...

Almost done with this panel.. Fill a few ruff spots with spot putty a rub and final primer. First off was to get some primer down. Not sure what to call these things, but hopefully they look cool! i'll show the inspiration for adding these soon. A lot more sanding some more...

Some rear end action ! Defyant's Mods

A little meshify c i knocked up in the add break !

Thanks Fritzz mee too mate mee too ! i'm starting to feel a bit over this one :D Dare i say it again :P A bit more work to the front panel again today :D Just wanting to sort out the locking system and get the front near completed under primer and the vents painted.

A bit more work to the front panel today :)

Some Good news, Mwave have Jumped on board with some hardware for this build. A big thanks to the guys @ MWave for the support. GIGABYTE Z390 AORUS ELITE INTEL I7-9700K GIGABYTE GEFORCE RTX 2060 SUPER TEAM FORCE VULCAN 16GB 3200 INTEL 660P 512GB M.2 4 X SAMSUNG SSD'S Last but not least...

A bit of black satin to get a better idea. Still needs a lotta work to get all the lines even but for now i can move onto the second front.

Because i cant make up my mind what style of front i want for this case... i'll make 2 :) The first will be a grill type front.

Cheers primetime tyvm mate :) Next update is where all the parts get alot of prep work. Bondo , sanding primer more bondo primer putty high fill spray putty and sanded again :P The first part to get some attention was the top section. Turning a rounded bend into a sharp line takes a fair...

The next little addition was to be for the GPU. A side brace will be added later to stop any side wobble. A small cover is made to help hid the riser cable. Threads are tapped for the top And slots for the bottom. So far so good. The original plan was to run...

The front fans are still there :) Was pretty much just a test rig for the cooler.... the gear will go into a custom case :)

With the basic design and layout done its time to start modding all the parts :) The first part to get some treatment is the spine. The idea will be to add some pattern to each side. This will also add another 2.5mm to the thickness of the spine adding a lot more strength. A pretty basic...

A new year and another case mod :) The concept of this case mod has evolved over it's build so far. The original idea comes from the new wave of open design cases. The Cougar Conquer, Antec Torque and The ZC-11. More so the latter of the 3 . But ive added some extras :) And i'll build it...

My work shop shed :) i mostly do head and tail light mods now with some custom sequential blinkers installs as well. Every now and then i get the urge to bang out a mod..... Cant live in the glory days of past mods forever :) Cheers mate :) My office is a disco party :P Hey mashie i...

Finally on the home stretch , Re design the side blades a little , added the magnets for the other side window put a base unit on for an up coming even and had some more fun with the lighting effects. Remember please turn your volumes down :) Heavy Doof Bit girly

Ty guys :D Sorry for the lack of updates, The lighting set up is run off a single Node pro and rgb hub... clean and simple. iCue controls the rest though software. The Evo 212 HS is given a blast with satin black . Hardware in and some cable management I simple fan...

With most of the RGB stuff and internal mods out of the way i stood back and had a good look and decided the case could use a rear wing this is still now subject to change but i'm pretty happy with the look. Either way this will be a bolt on accessory. It was about this same time that i...

The insides of the case are pretty simple... so i thought Being basically 2 componants. A motherboard tray/psu cover and a front fan housing. The next picture tells the whole story with out 10 extra posts. From left to right. 1,2,3 and finally 4 being the final for the psu cover. Number 3...

Hi guys! I'll try and condense it a fair bit as this mod has changed... a alot! internally. The mod was inspired by the one and only InsolentGnome and his amazing G-Frame scratch build case mod. I was so impressed by the open design and pro work he did on this one i decided to have a go my...

a palm pilot!..? i think not Carth. How bout you take a few pics and show us the proof of that? hang on! i'll do it for you :mad: Ive had the same Standard Keybord for a while now! which is good....... A 20" Vewsonic in the middle with 15"s on the side. The Keyboard Dwarfs...

Very clean loop !! best ive seen here @ [H] yet :)

Thanx again guys :) Pm sent mate :)

Thanx again guys :) scratches on white plex are for the most part invisable.... the plex is gloss white all the way thru........... Any surface you use as a "worktop" will get scratches over time...the idea is to just use a surface that masks them best. Plex is "buffable" and after a...

I'm sure someone will copy and do it for you :)

the motherboards are a refllection cause from the high gloss of the white plex. thyr actually on a shelf on the other side of the room........................ Theres some more pics here http://www.hardforum.com/showthread.php?t=1070005 It's just a work bench area ... i just...

Finally add the Tri-Mon... the Tri-mon mod runs off an AGP duel out and one cheapie PCI...Ultramon takes care of the wallpaper. Some wire stealthing to do on the mon cables and some stick on plex theme work can be added as i go but this now gives me a nice clean well...

Next is to geto work on the new Work area! 6mm thick sheets of Gloss white plex will be used for the new workbench. Next is to bolt on a mounting system for the screen

While the glue does its work... the LCD panels are taken over to have the silver metal boarders painted. The fame is now ready for the LCDS To mount the New Tri-Mon mod to the workshop wall large G brackets are cut from 12mm thick plex.

With the growing amount of modding work and "one off" custmer mods i finally decided to give the workshop a bit more of a "pro look" The workshop looks well used and tired... The first thing i really wanted to add was nice monitor setup! and not just one LCD... i wanted at least 2...