Search results

I have had this nuc working fine for years now all of a sudden i cant get windows to display anything on my lcd that only has dvi. I use a dvi converter and an hdmi cable. I've ruled out converters, ruled out cables, even ruled out screens. I took the nuc plugged into an hdmi only lcd and in...

I can now confirm that at least as long as the usb from the pimax crystal hub is plugged into the pc (win 11), i get this bsod, forced restart on resuming from sleep. I've tried multiple ports and an addon card as well, all do the same thing. I also tried disabling hybrid sleep. MB: MSI z690-a...

Lately i seem to be getting a lot of issues with the computer on pressing the power button to resume from sleep with my setup. I dont overclock, i have most turbo settings if not all on auto, i have the cpu volts fixed however at 1.255 llc6 adaptive setting, the ddr is xmp and auto, which comes...

i cant seem to find any recommended bios settings with this configuration. I've been plagued with bsod with both manual voltage on cpu/ram and auto. I was originally thinking with non k, auto cpu volts was fine, i've also tried manual and auto dram volts, currently on auto cpu and dram at 1.4...

I'm not 100% sure this is where the issue lies, but i had a 3080ti previously and with my ch pedals and yoke the screen would time out at the time set, no issues. I put the new 4090 in, latest nvidia driver (and previous drivers since the 4090 was released tried too), i did clean, i did DDU in...

Anyone ran into this with a 4090. Black screen, recovers and logs to event viewer. I was just using chrome, nothing else. In my case windows 11 + a 1000 watt evga SuperNova Platinum + 12900k cpu at 4.9ghz and 6400 ram. I never had this occur with the previous 3080ti. I ran DDU and the latest...

So im midstream on a hard drive/server issue with our dpm server here so i've opted to start looking for a system that can ship and be here asap. The old system was a 16 or more 4u chassis type setup (sas 12 GB/sec) with dual 1GB nic ports.. had a supermicro dual E5-2620 v4 2.10 ghz cpu's and...

I have a server 2019 box, its a supermicro sas chassis with an 8 drive raid 6 array on this hardware megaraid 3108. What happened originally here is that i found windows was stuck, black screen.. so i reset the machine, then i found that it hangs on the supermicro logo screen with windows...

Im running this board with windows 11. What i had previously was windows 10 working fine, sleep mode, screens shutting off (Lcds are sony x800d and a 43" vizio lcd) + 3080 ftw3 video card, 10900k cpu. What i did at first that actually worked was upgrade 10 to 11 (screens would still shutoff...

I have this combo of hardware and it seems ever since i did a recent firmware update, that now the nest goes to offline mode randomly. *I guess if i thought i could go back a firmware level (somehow) i'd try to go back to the last one? Has anyone else ran into this and knows of a fix? Thanks...

I have an asus z170a board, with onboard video and then 5 gpu's attached with risers. When I try to rdp to the machine i get that error, usually you can click ok then retry RDP and its fine. I think its getting confused on connecting regarding the onboard vs gpus. I have a dvi cable going into...

Im using a z170a motherboard for mining and as a server (win 10 though), i have limited slots because i have a few nvme cards in it at the same time. I want to say i thought this was possible, but there is a way to break out the pciex16 or x8 slot into multiple risers from the same slot? Im not...

I have the older 6700k with the asus z170a board. I have an m.2 slot filled (i've tried enabled m2 express vs sata express in bios btw, but each time i restart it resets to sata express, unsure what the m2 mode even means, the onboard sata m2 nvme works fine). So i have 2 nvmes, i put them in...

I know i'm a little late to the mining game (some will say after july things will get non profitable for mining), however, i overspent now have a dedicated 3080 for mining. I have an existing plex/media/security cam (blue iris) server in the basement, 6700k with z170a motherboard (has 3 pciex16...

Im having some issues with noise in the radiator/tubes/90C temps, tried shaking, redoing tim, no good. Question is, can you swap out the pump for say a corsair H60? (dont see anyone out there with tutorials) I got the nzxt bracket but it only apparently worked with an nzxt pump or the h55 (no...

At least when used with the motherboard's bluetooth and not the dongle that came with it (not sure if using the dongle that came with it would avoid this issue), if you reboot the pc the keyboard wont work to enter the bios, you must connect a wired keyboard. Does anyone know of a workaround...

I had a failing drive (in port 3) on the AOC-S3108L-H8iR card, so I put a brand new drive in its place. This is a raid 6 array of 8 drives, the OS was carved out of that. I put the new drive in slot 3, it initially didn’t show as rebuilding, it was offline, so in the windows interface for this...

I'm running win 10 20H2, randomly but thankfully rarely, i run into this issue. I have an i9-10900k overclocked only to a mild 4.9ghz at 1.257v fixed in the bios, ram at 4000mhz (xmp). It was stress tested a few months ago and passed all tests. I havent had this happen but once or twice but...

I had previously delidded (and applied liquid metal) successfully the 10900k, ran for a few months at 50x. Basically if i set it around 1.31v in the bios and load of 1.308 everything was stable, prime95 tested for nearly 24 hours etc. Max temps with p95 blend might have been around 87C give or...

I have an msi motherboard, i think LLC is set to 4.. i had successfully gone through stress tests p95 blend with fixed bios setting, i think it was for nearly 16 hours, vcore under load of around 1.308v (bios was around 1.32 i think), this at 50x. Then i tried adaptive, i tried just regular...

I cant seem to find this answer, but curious, anyone thats done an advanced rma on an evga card. Does the new card continue the remaining part of the 3 year warranty? What happens if you opt to just keep both cards, do they just keep the hold on the card and turn into the formal charge (no...

I have the canyon intel NUC6i7KYK nuc, seems lately when the cpu hits like 30% (say on a boot up after logging in), it will hit 90-96C for some reason. I've been monitoring fan speeds, seems to be 1000 to 3000 on average, it does this even if i do hear the grinding sound that sometimes comes...

I just received the new 3080 ftw3, i am assuming since it just came its one of the newer ones without the cap issues? Unsure how to tell. At any rate, i had 456.55 already installed from the 1080ti hybrid. Ran some quick tests to verify the new card worked (noisy at 70c but fps increase was...

I have an older 2016 thermaltake 360 aio that was starting to make grinding sounds at least on one fan. Its out of warranty and they dont make replacement 5 pin fans to connect to the controller any more, so i opted to test out the kraken x73 360 with the 10900k at 5.1ghz (delidded). With my...

Im looking for a mini pc to operate as a server basically. Right now i use a full case server style one with an intel i7-6700k for the cpu. Whats hard to find in a mini is that of 3 nvme slots, at least i think. I was trying to reduce the overall size and power load while maybe getting a...

I think i have an issue with msi unify z490 and 10900k. Example: set bios to 1.285 LLC4, under load its 1.274. Set to LLC3, under load its 1.286 Set to LLC6, under load its 1.207 one would think the higher the LLC the more close the load should be to the bios reading? LLC6 was way off the...

I have successfully overclocked my msi unify and 10900k to 5.1 at 1.315v (auto ring, auto everything else and 4000 on ram). Its about 1.301 initially in windows and 1.315 under heavy load. Ive noticed that with eist on (i think its this) the cpu will lower to 8x while idle, bringing the watts...

I finally achieved stability with the msi unify (1.315v, roughly 94C realbench or 87ish real world max temps with aio360), in my other thread here. My remaining question (besides the fact i may still delid just to pull this down 7C) is whether or not if i switch to something a little more...

I've got this board and cpu combo coming, along with pc4-3200 4000mhz cas17 gskills (16x2). I'm curious as i've seen many successfully overclocking to around 5-5.2ghz on average, has anyone tried doing the per core to keep the (two?) 5.3ghz cores and lower all the rest to 4.9 to 5.0 at most...

I have finally decided on going forward with a new build to replace my 8700k cpu (5ghz on all cores), so i can move that build into my living room htpc instead. Ill gain the advantage of the extra cores for rendering demands and should maintain close to 5-5.2ghz on at least some cores. I seem...

I have an older thermaltake 360 on an 8700k cpu z370 board, i think it was said somewhere that this thermaltake (https://www.amazon.com/gp/product/B00MPIDYTO/ref=ask_ql_qh_dp_hza) can still fit the board with the new cpu, can anyone confirm thats the case? Edit i guess this page confirms it...

I'm using precision x1 to overclock the 1080ti ftw3 hybrid. It has its switch set to oc mode. I've not really ever tried overclocking video cards in the past but thought i could give a slight boost here. I set the gpu overclock to +42, i set target power to 128, slid the voltage slider all...

I currently run gskill 2400 ram that i have overclocked just by boosting the ram voltage and maybe things like vccio (i forget) to 3200. With this I saw a decent fps jump for sims at least. I'm thinking if i just upgrade the ram to 4000 or higher capable ram, maybe something like samsung (b die...

Just throwing this out there to see if anyone has any input, as i think what i've got selected makes sense, but who knows, there could be a variant i havent considered. Right now my main flight sim rig (and rendering for astrophotography) is an 8700k overclocked at 5gh, ram at 3200mhz and a...

This has been a long standing issue with Nvidia for years now, they apparently still havent addressed. If you turn the overlay feature on for fps/video recording, it will prevent the lcd from going to sleep and consequently the pc as well. At one point i swear i had a newer geforce experience...

I've been plagued by this bug now for the last two windows iterations, back to at least 1909. I had a clean 2004 going then a few weeks in this hits again. I've had this happen on 3 machines, i think i found a few posts out there in the wild that reference this but not many that mention the...

I have a sony x800 with nvidia 1080ti. For some reason, since going to 2004 version of win 10, i keep loosing the sound device in the listing. The only way to get it to come back is to pull the video cable and put it back in. Has anyone ran into this and found a fix? Im guessing its some...

For the last few versions of windows i've had this annoying issue with the pc not wanting to sleep after timeout. My motherboard is the asus z370 hero with 8700k cpu for reference. It doesnt always occur, sometimes i can reboot and it will sleep fine after timeout after reboot. Other times...

I have my overclock on the 8700k stable (latest bios etc), after a 27.9 prime95 (with fma/avx mod set to 0) stable on a 24 hour prime 95 blend test. I assumed this was good to go, but maybe not? Or maybe i need to do avx enabled or fma or both but that might cook the cpu (i wouldnt think avx...

I have an older server chassis i use for a media center.. i do not believe it supports newer drives that have the pin 3 issue ive been reading about.. I'm puzzled by this "newer feature" as i havent ran into the issue thus far.. i have quite a few hard drives in the backplane slots.. mostly 4...