Recent content by markm75

I'll have to check, though after it goes black windows does boot. I can rdp just fine

I have had this nuc working fine for years now all of a sudden i cant get windows to display anything on my lcd that only has dvi. I use a dvi converter and an hdmi cable. I've ruled out converters, ruled out cables, even ruled out screens. I took the nuc plugged into an hdmi only lcd and in...

update: that didnt seem to work, it did initially but every time a longer duration sleep cycle occurs, it fails with the same error, back to the drawing board

Well it was probably generic superspeed hub, but there are 9 of them, so that made it a little hard, instead.. i was able to use usbdeview and determine which single device under human interface area was the crystal (and also renamed it using friendlyname registry hack), i went to the power...

I cant figure out which device manager object it is, i was actually looking for that before.

I can now confirm that at least as long as the usb from the pimax crystal hub is plugged into the pc (win 11), i get this bsod, forced restart on resuming from sleep. I've tried multiple ports and an addon card as well, all do the same thing. I also tried disabling hybrid sleep. MB: MSI z690-a...

Yeah that might be my next recourse (bios updated already) I bumped voltage but this time the stop code occurred after trying to sleep: 0x0000001e I guess more bumping is at hand i think i have it at 1.265 now instead of 1.255

I already had the power limit on 241 watts though, not the watercooler 4096 it tries for, i figure i'm probably not far off at the old 1.255, ill just go up a tad and when i dont get a failed power save im good, however i can get 2 or 3 in a row no issues.. and other stress tests were perfect...

I've opted to go auto on volts + adaptive for a short stint, so far no issues, however temps are 100c during msfs vs 87C with 1.255 + adaptive, so i guess next ill just bump up from 1.255 until stable. You would think running stock clocks would be easy and not have to play the volts game...

Lately i seem to be getting a lot of issues with the computer on pressing the power button to resume from sleep with my setup. I dont overclock, i have most turbo settings if not all on auto, i have the cpu volts fixed however at 1.255 llc6 adaptive setting, the ddr is xmp and auto, which comes...

Do you generally manually set the dram volts with this set, I'd be happy at cl38 n 5600, not sure if auto or 1.4

Thx I'll try that though cl38 not cl36 but for my application doesn't matter

From what i can see, or remember from past experiences, for this auto should be enough and xmp. So far since disabling xmp (left on 5600, 1.4v dram) i think it "may" be more stable, but i havent stressed it yet. I think perhaps this ram choice was bad.. i may try these for full xmp: Corsair...

i cant seem to find any recommended bios settings with this configuration. I've been plagued with bsod with both manual voltage on cpu/ram and auto. I was originally thinking with non k, auto cpu volts was fine, i've also tried manual and auto dram volts, currently on auto cpu and dram at 1.4...

Somewhat older topic but for those with the aero.. Have you noticed a background of "dust particles" banded i think horizontally, very faint, on bright white screens? I dont know if this is mura or not. I'm debating to swap the headset before my 1 year ends soon, but i have a feeling this is...